Small Wind Turbine Enair 800
The technology of the great wind applied in the small
The E800 wind turbine is designed to meet the energy demands of small industries such as farms, greenhouses, warehouses, etc. Its efficiency of generation and design allows us to supply three-phase installations of high power with a high performance. Its production is over 800kWh/day , with averages of 7 to 11m/s. This model has a specific patent that emulates the technology of the big wind, but adapted to small wind turbines
Designed to meet the requirements of the IEC 61400-2 standard, the E800 has an active control to manage all its 4 security systems and optimize its production by modifying Its pitch angle, according to the detected climatic characteristics. Among his innovations are techniques such as Computational Fluid Dynamics
15,9m
Diameter
4.900kg
Weight
4,0m
Side
CLASS III
Active Regulation
Data Sheet
Technical breakdown of the Enair 800 series point by point
| Characteristics | Type of values | |
|---|---|---|
| GENERATOR | Power | 70kW |
| Configuration | 3 phases - 500V - direct transmission | |
| Wind Turbine | Configuration | 3 blades, horizontal axis, leeward |
| Rated Power | 60kW | |
| Wind class | CLASS III / IEC 61400-2 / NVN I - A | |
| Applications | Grid connection - Micro network | |
| Nominal speed of rotation | 60rpm | |
| Start Rotation | 1,85m/s | |
| Cut production | 25m/s | |
| Protection | ||
| Weight | 4.900Kg | |
| Orientation | Aerodynamic orientation | |
| ROTOR | Diameter | 15,9m |
| Swept area | < 200m2 | |
| Blade length | 7,4m | |
| Material of the blade | Glass fiber with resins and carbon fiber inner skeleton | |
| Control type | Variable active pitch, electronic regulation and brake | |
| BRAKING SAFETY SYSTEM | Pass | Variable pitch with active control By wind and power |
| Brake | Hydraulic safety brake | |
| Electronic control of: | Wind Speed |
|
| TURBINE CONTROL | Electronic System | Programmable system to adapt the turbine Alarm log |
| Software | Customized software. General data screen (opc.) | |
| INVERSOR | Inversor solar | Compatible with solar inverters of constant voltage at 500V |
New application for production studies
Incredible improvement in our production calculation application
Characteristics
Enair Technology
Wind turbine blades
Profiles optimized based on CFD simulations and made with the latest resin compounds based on acrylic urethane and epoxy in combination with composite carbon and glass fibers.
Variable pitch of blades
Patented active variable pitch system with passive safety. This system offers an accurate contol of the position of the blades electronically and also protects automatically in case of failure.
Generator
Hidráulico
Sistema hidráulico basado en un sensor de posición áltamente preciso que nos determinará la posición del palas según los algoritmos de control.
Góndola
Estructura de acero donde se sujetan los diferentes componentes y la cual soporta todas las cargas establecidas en la Nirma IEC 61400-2.
Anemómetro
Wind sensor required to make decisions about the behavior of the Wind Turbine, in order to improve its productivity and safety.
Sistema de Control e Inversor
More than 600 control parameters and allows us to customize the machine to adapt it to the installation site. It also maximizes the output of the generator with maximum power point seg- mentation algorithms.
The most advanced technology of the wind farm
Econ
Save on your light bill in just 3 steps
Uses
Grid connected
Distributed energy generation. By means of this type of installation each dwelling can generate its own energy and sell the surplus to the electric company.
Isolated consumption
These installations are used when there is a great cost or difficulty to bring the power of the electricity grid to the place necessary for its consumption.
Water pump
One of the main characteristics and novelties of this new generation of wind turbines is the possibility of obtaining a water extraction by means of a direct pumping.